GET_MEMPOLICY

Section: Linux Programmer's Manual (2)
Updated: 2008-08-15
Index Return to Main Contents
 

NAME

get_mempolicy - retrieve NUMA memory policy for a process  

SYNOPSIS

#include <numaif.h>

int get_mempolicy(int *mode, unsigned long *nodemask,
                  unsigned long maxnode, unsigned long addr,
                  unsigned long flags);

Link with -lnuma.
 

DESCRIPTION

get_mempolicy() retrieves the NUMA policy of the calling process or of a memory address, depending on the setting of flags.

A NUMA machine has different memory controllers with different distances to specific CPUs. The memory policy defines from which node memory is allocated for the process.

If flags is specified as 0, then information about the calling process's default policy (as set by set_mempolicy(2)) is returned. The policy returned [mode and nodemask] may be used to restore the process's policy to its state at the time of the call to get_mempolicy() using set_mempolicy(2).

If flags specifies MPOL_F_MEMS_ALLOWED (available since Linux 2.6.24), the mode argument is ignored and the set of nodes [memories] that the process is allowed to specify in subsequent calls to mbind(2) or set_mempolicy(2) [in the absence of any mode flags] is returned in nodemask. It is not permitted to combine MPOL_F_MEMS_ALLOWED with either MPOL_F_ADDR or MPOL_F_NODE.

If flags specifies MPOL_F_ADDR, then information is returned about the policy governing the memory address given in addr. This policy may be different from the process's default policy if mbind(2) or one of the helper functions described in numa(3) has been used to establish a policy for the memory range containing addr.

If the mode argument is not NULL, then get_mempolicy() will store the policy mode and any optional mode flags of the requested NUMA policy in the location pointed to by this argument. If nodemask is not NULL, then the nodemask associated with the policy will be stored in the location pointed to by this argument. maxnode specifies the number of node IDs that can be stored into nodemask---that is, the maximum node ID plus one. The value specified by maxnode is always rounded to a multiple of sizeof(unsigned long).

If flags specifies both MPOL_F_NODE and MPOL_F_ADDR, get_mempolicy() will return the node ID of the node on which the address addr is allocated into the location pointed to by mode. If no page has yet been allocated for the specified address, get_mempolicy() will allocate a page as if the process had performed a read [load] access to that address, and return the ID of the node where that page was allocated.

If flags specifies MPOL_F_NODE, but not MPOL_F_ADDR, and the process's current policy is MPOL_INTERLEAVE, then get_mempolicy() will return in the location pointed to by a non-NULL mode argument, the node ID of the next node that will be used for interleaving of internal kernel pages allocated on behalf of the process. These allocations include pages for memory-mapped files in process memory ranges mapped using the mmap(2) call with the MAP_PRIVATE flag for read accesses, and in memory ranges mapped with the MAP_SHARED flag for all accesses.

Other flag values are reserved.

For an overview of the possible policies see set_mempolicy(2).  

RETURN VALUE

On success, get_mempolicy() returns 0; on error, -1 is returned and errno is set to indicate the error.  

ERRORS

EFAULT
Part of all of the memory range specified by nodemask and maxnode points outside your accessible address space.
EINVAL
The value specified by maxnode is less than the number of node IDs supported by the system. Or flags specified values other than MPOL_F_NODE or MPOL_F_ADDR; or flags specified MPOL_F_ADDR and addr is NULL, or flags did not specify MPOL_F_ADDR and addr is not NULL. Or, flags specified MPOL_F_NODE but not MPOL_F_ADDR and the current process policy is not MPOL_INTERLEAVE. Or, flags specified MPOL_F_MEMS_ALLOWED with either MPOL_F_ADDR or MPOL_F_NODE. (And there are other EINVAL cases.)
 

VERSIONS

The get_mempolicy() system call was added to the Linux kernel in version 2.6.7.  

CONFORMING TO

This system call is Linux-specific.  

NOTES

For information on library support, see numa(7).  

SEE ALSO

getcpu(2), mbind(2), mmap(2), set_mempolicy(2), numa(3), numa(7), numactl(8)


 

Index

NAME
SYNOPSIS
DESCRIPTION
RETURN VALUE
ERRORS
VERSIONS
CONFORMING TO
NOTES
SEE ALSO

This document was created by man2html, using the manual pages.
Time: 02:54:48 GMT, September 18, 2014